Deals
product info
Method Race Wheels MR413 Beadlock
MR413 Beadlock
Go further, perform better and look good while doing it with the Method Race Wheel MR413 Beadlock, a true off-road warrior.
Method Race Wheel MR413 Beadlock Features
Designed for all-out off-road thrills, the Method Race MR413 Beadlock is tough enough to go anywhere you dare to take it. This maximum security wheel comes with a true beadlock outer ring with a new polished finish that will help you stand out on the dunes and the trails alike.
And its rugged, forged 6061 aluminum V.7 beadlock ring will help keep your tires in place—ideal for aired down off-road madness.
With its lightweight but ruggedly strong construction and off-road performance features, you can’t go wrong with this UTV rim.
Other performance features of the MR413 include:
-
A forged 6061 aluminum with T6 heat treatment construction ensures rugged performance.
-
A reinforced inner lip delivers extreme strength and durability.
-
The wheel and beadlock is designed to shed sand and debris from the wheel lip.
-
It includes a grade 8 zinc-plated beadlock hardware kit.
-
With a rugged-yet-light build, the 15x7 front and 15x10 rear rims weigh approx. 5lbs less than comparable beadlock wheels.
Method Race Wheel MR413 Beadlock
Race, UTV and Beadlock style wheels are intended for off-road and race capacities only. Due to their intended conditions, Method Race Wheels does not offer any structural or cosmetic warranty.
RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15.0" |
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" - 10.0" |
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-136.0 - 6-139.7 |
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 0 - 38 |
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 70.0 - 120.0 |
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 - 6 |
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600.0 LBS |
Most Likely Fits:
Additional Links: