back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
$275.00 - $383.00 /EA
Deals
5% Military Discount for active duty, veterans, and reserves. (Cannot be combined with America's Tire credit card 5% savings offer)
learn more about this discountproduct info
Fifteen52 Turbomac
The Fifteen52 Turbomac is a classic 5 spoke wheel design with a vented outer ring surrounding the outer lip. The Turbomac features a very strong and lightweight motorsport design for form and function. It is built in 17 and 18 inch sizes in an Asphalt Black or Rally White finish and comes with a snap-in center cap. Seen in the Gymkhnana SIX video and co-designed by Ken Block, the Fifteen52 Tarmac has the Block Skull stamp of approval on the back of every wheel.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17.0" - 18.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.5" - 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-100.0 - 5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 30 - 48 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 58.1 - 73.1 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 - 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600.0 LBS |
Most Likely Fits:
Additional Links: