back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
$124.00 /EA
Finish: Flat Black Full Painted
Deals
5% Military Discount for active duty, veterans, and reserves. (Cannot be combined with America's Tire credit card 5% savings offer)
learn more about this discountWe can usually get these wheels even sooner via transfer from a different store or nearby warehouse. Need it now? Call store -650-988-9611
product info
Drag DR-68
The Drag DR-68 is an 11 spoke wheel design with the spokes rolling into the lip of the wheel. Built in a Flat Black finish and comes with a snap-in center cap featuring the Drag brand logo. 17X7 inch size with a 4-98 bolt pattern to customized your Fiat.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-98.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 30 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 58.2 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 22.5 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Flat Black Full Painted |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1100 LBS |
| VPN Vendor Product Number | DR68177123058BF1 |
| GTIN Global Trade Item Number | 13113 |
Most Likely Fits:
Additional Links: