back to results
Need help?
Wheel questions:
866-531-5203
M-F: 12PM - 1AM GMT
|Sat: 12PM - 12AM GMT
product info
Black Rhino Bullhead
The Black Rhino Bullhead is a concave 16 spoke design with clean lines and each spoke rolling up to the lip of the wheel. The Bullhead is built in 17, 18 and 20 inch light truck and SUV sizes in a Matte Black finish. It comes with a bolt-on center cap featuring the Black Rhino brand logo. If you want to add some aggressive character to your ride, check out the Bullhead, by Black Rhino.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17.0" - 20.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9.0" - 9.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-127.0 - 6-139.7 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | -18 - 12 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10.0 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 - 6 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2250.0 LBS - 2500.0 LBS |