Deals
product info
6061 V-Forged VF7
If your aesthetic is a little more “Continental” then try the European styled split 7 spoke VF-7, a wheel with a mass appeal and performance to boot. Iconic, classic, this lightweight aerospace grade aluminum wheel (forged from 6061 aircraft grade aluminum) delivers customized performance while maintaining a well beloved look and yet modern feel.
Each spoke end is reinforced for additional strength and is paired with added thickness on the rim and barrel sections to ensure a long service life. Part of VForged’s Street Forged series, it boasts a 2100lb load capacity per wheel with a knurled rib barrel to reduce tire slippage concerns.
This split spoke wheel makes any vehicle look good and comes in a wide range of fitments between 17 and 20 inch diameters and a luxurious Satin Titanium finish.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17.0" - 20.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.0" - 9.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0 - 5-130.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 35 - 45 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 56.1 - 74.1 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2100.0 LBS |
Most Likely Fits:
Additional Links: