back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Motegi Racing MR146 SS6
The Motegi Racing MR146 SS6 is a split 6 spoke design with MOTEGI RACING etched on the lip of the wheel. The MR 146 SS6 is built in 15, 17 or 18 inch sizes in a Hyper Silver or Satin Black finish. It comes with a snap-in center cap featuring the Motegi Racing brand logo. Utilizing Flow Form Technology for added strength and lighter weight, check out the MR146 SS6, by Motegi Racing.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-108.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 42 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 19.7 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Satin Black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1280 LBS |
| VPN Vendor Product Number | MR14677045742 |
| GTIN Global Trade Item Number | 885463814353 |
Most Likely Fits:
Additional Links: