back to results
Need help?
Wheel questions:
866-531-5203
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
product info
Method Race Wheels MR312
The Method Race Wheels MR312 is a split 6 spoke wheel design with a simulated beadlock on the lip of the wheel. This wheel features Method machined into one of the spokes and comes with a bolt-on center cap also featuring the Method Race Wheels logo. This wheel is built in popular 17 and 18 inch sizes in a Matte Black or Bronze finish. Method Race Wheels have a lifetime structural warranty and a 2-year cosmetic warranty on the finish.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 18" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 8-165.1 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 18 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 130.81 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 41.08 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 8 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 3640 LBS |
| VPN Vendor Product Number | MR31289080518 |
| GTIN Global Trade Item Number | 191682010736 |