back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Method Race Wheels MR309 Grid
The Method Race Wheels MR309 Grid is a 6 spoke mesh wheel design with a simulated beadlock on the lip of the wheel. This wheel features Method machined into one of the spokes of the wheel and comes with a push-thru center cap also featuring the Method Race Wheels logo. This wheel is built in popular 16 thru 20 inch sizes in a Matte Black or Titanium finish. Method Race Wheels have a lifetime structural warranty and a 2-year cosmetic warranty on the finish.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-139.7 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 0 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 32 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Black |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2650 LBS |
| VPN Vendor Product Number | MR30978555500 |
| GTIN Global Trade Item Number | 191682005794 |