product info

MB Wheels Razor

The MB Wheels Razor is a classic modular alloy wheel design. This wheel features accents on the lip of the wheel with both divots and gear type cut outs for some added dimension. It is offered in a matte black finish, black with a machined face, and a chrome finish. It includes a 2 piece, snap-in MB center cap. The MB Razor adds a classic, everlasting design with a twist to any stock, leveled, or lifted Jeep, Truck or SUV.

RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	17"
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	8.5"
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle.	6-139.7
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender.	25
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore.	10
WEIGHT The weight of the wheel measured in pounds (weight of wheel only).	26 LBS
VENDOR FINISH The manufacturer finish of the wheel.	Black Machined Face
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern.	6
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated.	2200 LBS
VPN Vendor Product Number	05-7884BM
GTIN Global Trade Item Number	49398

Most Likely Fits:

Additional Links: