product info

KMC KM685 District

Where the KM685 District makes its case for being the best 5-spoke satin black, matte bronze or silver machined wheel you can put on your vehicle is in its combination of contemporary finish options and heritage design cues. All in 5-lug options from 18, 19, 20 and 22-inch fitments, the KM685 District carves out its own path if you are ready for the attention that goes with it.

RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	20"
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	8.5"
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle.	5-112.0
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender.	35
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore.	10
WEIGHT The weight of the wheel measured in pounds (weight of wheel only).	35.26 LBS
VENDOR FINISH The manufacturer finish of the wheel.	Bright Silver With Machined Face
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern.	5
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated.	1400 LBS
VPN Vendor Product Number	KM68528557435
GTIN Global Trade Item Number	885463074344