back to results
Need help?Wheel questions:
866-531-5203
M-F: 1PM - 1AM GMT
|Sat: 1PM - 12AM GMT
product info
Drag DR-76
From Drag Wheels comes the Drag DR-76, an aggressively styled split 5-spoke wheel with machined details on each spoke that run into a curved spoke on the lip. Available in a stylish flat black, hyper graphite or rally bronze finish, the commanding Drag DR-76 will enhance the look and performance of your vehicle. The DR-76 features a snap-in center cap with the Drag logo and is available in 20X9 inch sizes and common bolt patterns to fit a wide range of vehicles. This wheel will accept your factory BMW (OEM BMW#36 13 1 095 361) or Mercedes (OEM MBZ#A171 400 00 25 or 220 400 01 25) center cap.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 20.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9.0" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-112.0 - 5-130.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 20 - 45 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 66.56 - 74.1 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2150.0 LBS |