back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Drag DR-11
The Drag DR-11 is an enduring 5 spoke design highlighted by rivet accents and built in a dual-drill bolt pattern to fit a wide range of tuner applications. It is offered in popular 17 inch and 18 inch JDM sizes and finishes that include machined lip options in Silver, Gunmetal, and Gloss Black. It includes a snap-in center cap featuring the Drag wheels logo. The Drag DR-11 is an affordable, street and race ready design with strength and durability.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 18" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0/5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 45 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 22 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Silver Machined Lip |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1520 LBS |
| VPN Vendor Product Number | DR111875054573S |
| GTIN Global Trade Item Number | 47182 |
Additional Links: