back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Black Rhino Coyote
The Black Rhino Coyote is a concave 8 spoke design with a brilliant machined face and simulated bead lock ring on the lip. The Coyote is built in popular 17, 18 and 20 inch light truck and SUV sizes in a Gloss Black with machined face and stainless bolts finish. It comes with a bolt-on center cap featuring the Black Rhino icon. If you were building a truck from the ground up, you should start with the Coyote, by Black Rhino.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-127.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | -18 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 43.43 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Blk W/mach Face & Stainless Bolts |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2250 LBS |
| VPN Vendor Product Number | 1790CYT-85127B71 |
| GTIN Global Trade Item Number | 195338012334 |
Most Likely Fits: