back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Advanti Racing Hydra
The Advanti Racing Hydra is split 5 spoke that branches out wider and rolls into the lip of the wheel. The Hydra is built in standard or staggered 18 through 20 inch sizes in Matte Black with Bronze Face, Matte Black with Machine Face or Titanium Mirror finish. Built with Dynamic Spinning Technique (DST) and Flow Forming Technology for lighter weight and added strength. It comes with a snap-in center cap featuring the Advanti brand logo. Add some precisely crafted style points to your ride with the Hydra, by Advanti Racing.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 18" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-108.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 45 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 31.31 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Matte Black Machine Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1499 LBS |
| VPN Vendor Product Number | HD8850845B |
| GTIN Global Trade Item Number | 043482226384 |
Most Likely Fits: