back to results
SAVINGS
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
TSW Donington
The TSW Donington is a chic, full-face, mesh style wheel design offered in Gunmetal with a machined cut face or full Matte Black finishes. It includes a snap-in center cap with the TSW wheel logo. With its sleek mesh design and wide variety of fitments including staggered sizes, make sure to check out the TSW Donington.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 20" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 15 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 37 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gunmetal Mirror Cut Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1925 LBS |
| VPN Vendor Product Number | 2085DON155114B76 |
| GTIN Global Trade Item Number | 195338056055 |