back to results
Need help?
Wheel questions:
866-531-5203
M-F: 12PM - 1AM GMT+0
|Sat: 12PM - 12AM GMT+0
product info
Method Race Wheels MR409
The Method Race Wheels MR409 UTV is a 10 spoke wheel design with Method etched into the lip of the wheel. It comes with a bolt-on center cap featuring the Method Race Wheels logo and is built in popular 14 and 15 inch UTV sizes in a Matte Black or Steel Grey finish. UTV Wheels are for race and off-road use only and are not subject to any structural or cosmetic warranty because of the conditions these wheels are built for.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-156.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 132 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 19.3 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Steel Grey |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600 LBS |
| VPN Vendor Product Number | MR40957046452 |
| GTIN Global Trade Item Number | 191682014345 |