back to results
EXCLUSIVE
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
MB Wheels Interline
The MB Wheels MB Interline is a split 5 spoke design. It is offered in a stunning gunmetal finish with a machined face along with a clear coat for added durability and finish protection. It is built in a single drill bolt pattern with high offsets to fit most Subaru and Mazda vehicles. It also includes a snap-in center cap with the MB Wheels logo. The MB Interline is a wheel that is sure to compliment the look of any vehicle.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 48 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 24 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gunmetal/machined Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1518 LBS |
| VPN Vendor Product Number | 177INT511448GMF |
| GTIN Global Trade Item Number | 48581 |