product info

KMC KM714 Regulator

The KMC KM714 Regulator is a split 8 spoke design with each spoke running into the barrel of the wheel for an even larger lip appearance. The KM714 Regulator is built in 20 through 24 inch light truck or SUV sizes in a Chrome or Gloss Black finish. It comes with a covered, screw-on center cap featuring the KMC brand logo. Looking for a wheel that is to be an attention getter, check out the KM714 Regulator, by KMC.

RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	20"
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip.	9"
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle.	6-135.0/6-139.7
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender.	30
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore.	10
WEIGHT The weight of the wheel measured in pounds (weight of wheel only).	38.29 LBS
VENDOR FINISH The manufacturer finish of the wheel.	Gloss Black
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern.	6
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated.	2500 LBS
VPN Vendor Product Number	KM71429066330
GTIN Global Trade Item Number	885463728551

Most Likely Fits:

Additional Links: