back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
KMC KM685 District
Where the KM685 District makes its case for being the best 5-spoke satin black, matte bronze or silver machined wheel you can put on your vehicle is in its combination of contemporary finish options and heritage design cues. All in 5-lug options from 18, 19, 20 and 22-inch fitments, the KM685 District carves out its own path if you are ready for the attention that goes with it.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 22" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-115.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 15 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 38.94 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Satin Black W/ Machined Face & Register |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1400 LBS |
| VPN Vendor Product Number | KM68522915515 |
| GTIN Global Trade Item Number | 843962054434 |
Most Likely Fits: