back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Enkei NT03+M
The Enkei NT03+M is a 12 spoke design with a perimeter brace ring around the spokes. In the Racing series lineup, the NT03+M features a twin valve design for accurate monitoring while adjusting your tire pressure. It is built in popular 17 and 18 inch sizes in a F1 Silver or Hyper Black finish. The NT03+M comes with a snap-in center cap featuring the Enkei brand logo. This lightweight wheel uses the Enkei MAT spinning process, Rim-Rolled technology.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 18" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 72.6 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 25 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Silver Paint |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1521 LBS |
| VPN Vendor Product Number | 3658856538SP |
| GTIN Global Trade Item Number | 62462 |