back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Drag DR-50
The Drag DR-50 is a split 5 spoke design highlighted by a machined face. It is offered in a Flat Black, Gloss Black, and Gunmetal finishes, all with a machined face. It includes a snap-in center cap featuring the Drag wheels logo. Built from superior aluminum alloy, the Drag DR-50 combines affordability with lightweight style and quality.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 6.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0/5-114.3 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 40 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 15 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Black Machined Face |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1518 LBS |
| VPN Vendor Product Number | DR501565054073GBM |
| GTIN Global Trade Item Number | 51614 |