back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Drag DR-43
The Drag DR-43 is a multi-spoke design highlighted by unique accents to each. It is offered in wide variety of finishes and includes a snap-in center cap featuring the D Drag wheels logo. This wheel will also accept your factory OEM BMW center cap in the 5-120 bolt pattern (OEM BMW cap # 36 13 1 095 361) or your factory OEM Audi center cap in the 5-112 bolt pattern (Audi OEM cap # 4B0601170). Built in popular 17 inch and 18 inch sizes, the Drag DR-43 will add class and luxury, hand in hand with strength and durability.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-120.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 40 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 22 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Silver Full Painted |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1700 LBS |
| VPN Vendor Product Number | DR43178234072S1 |
| GTIN Global Trade Item Number | 67170 |