back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Black Rhino Cyclone
The Cyclone truck rim by Black Rhino takes its namesake to new heights with its directional network of spokes, all conjoined with the classic Black Rhino center cap. With milled inlays in gloss black and gloss titanium finishes, in 5 and 6-lug bolt patterns available for 20, 22 and 24-inch fitment options all combine to make for a stratospheric addition for any truck the Cyclone goes on.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 20" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 9" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 6-135.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 30 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 51 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Black W/milled Spokes |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 6 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2450 LBS |
| VPN Vendor Product Number | 2090CYC306135B87 |
| GTIN Global Trade Item Number | 195338090974 |