Deals
product info
Vision Manx 2
Vision Manx 2
An off-road wheel with vision, the Vision Manx 2 delivers performance prowess and classic trail tailoring. Where the road ends is where the Manx 2 really begins to shine. Its features include:
The Manx 2 has rugged styling suitable for any trail-ready truck or SUV.
This stunner is a split six-spoke wheel with a stepped lip.
Its off-road look is made even tougher with its riveted lip and geometric machined details, hallmarks of classic off-road design.
The split spokes meet the wheel at the inset step, for a subtle deep dish feel.
Its bolt-on center cap isn’t the only place you'll see the Vision logo; it’s also featured prominently on one of the split spokes.
Available in offsets from -12 to +12, you can dial in your ride’s stance.
Super strong and heavy duty load capacity? No problem, the Manx 2 comes in load capacities from 2,500lbs to 3,650lbs.
With 17-20” sizes available and 5,6 and 8-lug bolt patterns, the Manx 2 fits the following: Ford Explorer, Escape & Edge, Honda CRV, Jeep Cherokee, Wrangler & Compass, Nissan Pathfinder, Toyota Tacoma & RAV4 and more.
The Manx 2 is available in satin black, bronze with satin black lip and satin gray with satin black lip finishes.
Vision backs this wheel with a lifetime structural warranty and a one year finish warranty.
Don’t get caught off-road without the right tires, too. Bump up the savings with one of our wheel and tire packages!
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15.0" - 20.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" - 9.0" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-110.0 - 8-180.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | -12 - 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 72.0 - 131.1 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 - 8 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1300.0 LBS - 3650.0 LBS |