Deals
product info
Method Race Wheels MR502 Rally
Method Race Wheels MR502 Rally
Method Race Wheels has done it again with the MR502 Rally, a lightweight racing style wheel that includes gorgeous finishes, a wide spectrum of available sizing and dashing good looks. Some features include:
-
The MR502 is a racing style wheel with a full face 10-spoke design with machined debossed details on the lip of the wheel and inner cavity for an intriguing look.
-
This wheel features a screw-on center cap embossed with the METHOD logo, giving you both bragging rights and a protected hub.
-
It’s constructed of sturdy but lightweight solid A356 aluminum with T6 heat treatment, so you get strength and reduced unsprung weight.
-
This rim is engineered to exceed SAE 2530 specifications, meaning your wheel goes above and beyond the stringent standards set for aftermarket wheels by the Society of Automotive Engineers.
-
This wheel offers hub centric fitments for common applications including Mitsubishi, and includes hub rings for Subaru vehicles.
-
Available in 16-18” diameters, the Rally is an excellent choice for Subaru, Mitsubishi, Honda, Chrysler and Ford vehicles.
-
17” sizes should clear Brembo brakes on all model year Subaru and Mitsubishi vehicles.
-
To suit any vehicle paint color or driver preference, the Rally comes in four fine finishes including: matte black, method bronze, titanium and gold.
-
Method Race Wheels boasts the industry’s best lifetime structural warranty plus a two year cosmetic warranty on your wheel’s finish.
For even more savings, check out our wheel and tire packages!
RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 16.0" - 18.0" |
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" - 8.0" |
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-100.0 - 5-114.3 |
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 15 - 38 |
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10.0 - 67.1 |
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1850.0 LBS |
Most Likely Fits:
Additional Links:
Additional Links: