Deals
product info
Method Race Wheels MR412 Bead Grip
Method Race Wheels MR412 Bead Grip
When you need premium materials and performance, turn with confidence to the Method Race Wheels MR412 Bead Grip UTV wheel.
Method Race Wheel MR412 Bead Grip Features
An off-road giant, Method Race Wheels only offers the best in trail-worthy design and build quality. The MR412 Bead Grip is a UTV-specific off-road wheel with an attractive face and peak performance features such as a forged 6061 aluminum with T6 heat treatment construction for lightweight strength and a super strong 1,600lbs load capacity.
Engineered for the highest levels of off-road performance, this lightweight but ruggedly built UTV rim will help you get more out of your off-road driving experience—even in the harshest and most demanding conditions.
Other performance features of the MR412 Bead Grip include:
Its Patented Bead GripⓇ tech engages the tire bead for increased grip at low tire pressures.
A tough multi-spoke design with handsome debossed METHOD logos offers up rugged off-road strength.
An aggressive safety hump on the bead seats helps to prevent de-beading.
Taken from the MRW race wheel line, its reinforced inner lip strengthens the wheel build.
With a lightweight design, the 15x6 size weighs an average of 2lbs lighter than the 407 Bead Grip wheels
Method Race Wheel MR412 Bead Grip Warranty
Race, UTV and Beadlock style wheels are intended for off-road and race capacities only. Due to their intended conditions, Method Race Wheels does not offer any structural or cosmetic warranty.
RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15" |
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 6" |
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-127.0 |
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 51 |
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 78 |
WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 18.2 LBS |
VENDOR FINISH The manufacturer finish of the wheel. | Machined - Raw |
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 |
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600 LBS |
VPN Vendor Product Number | MR41256012351 |
GTIN Global Trade Item Number | 191682023606 |
Most Likely Fits:
Additional Links: