back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
$103.00 - $229.00 /EA
Deals
5% Military Discount for active duty, veterans, and reserves. (Cannot be combined with America's Tire credit card 5% savings offer)
learn more about this discountproduct info
Method Race Wheels MR409
The Method Race Wheels MR409 UTV is a 10 spoke wheel design with Method etched into the lip of the wheel. It comes with a bolt-on center cap featuring the Method Race Wheels logo and is built in popular 14 and 15 inch UTV sizes in a Matte Black or Steel Grey finish. UTV Wheels are for race and off-road use only and are not subject to any structural or cosmetic warranty because of the conditions these wheels are built for.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 14.0" - 15.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" - 10.0" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-136.0 - 4-156.0 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 0 - 38 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10.0 - 132.0 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1600.0 LBS |
Most Likely Fits:
Additional Links: