back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Method Race Wheels MR313
The Method Race Wheels MR313 is a 10 spoke wheel design with a flow form construction for strength and lightweight. This wheel features Method machined into the lip of the wheel and comes with a push-thru center cap also featuring the Method Race Wheels logo. The MR313 is built in popular 17 inch sizes in a Matte Black or Gloss Titanium finish. Method Race Wheels have a lifetime structural warranty and a 2-year cosmetic warranty on the finish.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 6-139.7 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 25 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 10 |
| WEIGHT The weight of the wheel measured in pounds (weight of wheel only). | 26.5 LBS |
| VENDOR FINISH The manufacturer finish of the wheel. | Gloss Titanium |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 6 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2650 LBS |
| VPN Vendor Product Number | MR31378560825 |
| GTIN Global Trade Item Number | 191682014161 |
Most Likely Fits: