back to results
Need help?Call us at:
866-531-5203
M-F: 8AM - 8PM ET
Sat: 8AM - 7PM ET
product info
Method Race Wheels MR307 Hole
The Method Race Wheels MR307 Hole is a modular wheel design with a simulated beadlock on the lip of the wheel. This wheel features Method machined into the face of the wheel and comes with a push-thru center cap also featuring the Method Race Wheels logo. This wheel is built in popular 15 and 18 inch sizes in a Matte Black finish. Method Race Wheels have a lifetime structural warranty and a 2-year cosmetic warranty on the finish.
| RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 17.0" |
| RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 8.5" |
| BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 5-127.0 - 6-139.7 |
| OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 0 |
| HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 88.2 - 106.5 |
| NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 5 - 6 |
| LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 2500.0 LBS |
Most Likely Fits:
Additional Links: