Deals
product info
Drag DR-44
Drag DR-44
For a clean racing-inspired design, the Drag DR-44 has a lot to offer. Its classic JDM-inspired street styling pairs beautifully with its artful construction. The DR-44’s features include:
With a sleek design and JDM–style influences, this race-ready rim is perfect for your tuner.
A mesh wheel with a stepped lip and machined rivets on the secondary lip, it’s sure to turn heads.
The self-locking outer lip locks your tires in place to minimize tire slippage, so you can drop the hammer with confidence.
The inset hub face features a snap-in center cap showcasing the Drag logo.
This wheel is offered in 40 and 45 offsets.
Built in popular four and five-lug bolt patterns and 15’’–17’’ diameters, the DR44 fits many vehicles, including: BMW 328i, Toyota Corolla & Camry, Honda Civic, Nissan 350Z, Subaru BRZ & WRX, VW GTI & Jetta and more.
An aluminum alloy build gives this rim the best of both worlds: low weight and high strength, which means less unsprung weight for more racing grit!
The DR-44 comes in a rainbow of finishes, so you can get the perfect look for your ride by choosing from: gloss black machined lip, silver machined face, silver machined lip, gunmetal machined lip and gold machined lip.
Drag backs their wheels with a lifetime structural warranty and a one year finish warranty.
Pile on the savings with a wheel and tire package. Save on installation cost, time and hassle by shopping for it all at once!
RIM DIAMETER Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 15.0" - 17.0" |
RIM WIDTH Measured from the top of the wheel to the bottom in inches from the tire bead section, not including the outer lip. | 7.0" - 7.5" |
BOLT PATTERN The number of bolt holes and the distance of the lug holes. The bolt pattern is specific to your vehicle. | 4-100.0/4-114.3 - 5-100.0/5-114.3 |
OFFSET The offset determines the distance of the mounting pad in relation to the wheel's centerline. A higher offset tucks under the fender, a lower offset pushes towards the fender. | 40 - 45 |
HUB BORE SIZE The size of the hole in the back of the wheel that fits over the vehicle hub bore. | 73.0 |
NUMBER OF BOLTS The number of bolts in the wheel in relation to the bolt pattern. | 4 - 5 |
LOAD CAPACITY The weight the wheel can carry, mounted to a tire and inflated. | 1500.0 LBS |
Most Likely Fits:
Additional Links:
Additional Links: